Need help?Do you have a question about the Rigol DP832 and is the answer not in the manual?
General| Number of Outputs | 3 |
|---|---|
| Output Voltage Range CH1/CH2 | 0-30V |
| Output Voltage Range CH3 | 0-5V |
| Output Current Range CH1/CH2 | 0-3A |
| Output Current Range CH3 | 0-3A |
| Total Power | 195 W |
| Power per Channel CH1/CH2 | 90 W |
| Power per Channel CH3 | 15 W |
| Voltage Resolution | 1 mV |
| Current Resolution | 1 mA |
| Interfaces | USB, RS232 |
| Display | 3.5 inch TFT LCD |
Key safety precautions for instrument operation.
Explains warning and caution notations used in the manual.
Defines danger, warning, and caution terms found on the product.
Illustrates common safety symbols found on the instrument.
Overview of built-in safety features and protections.
Provides solutions for common instrument issues.
Lists detailed technical specifications of the DP800 series.
Instructions for powering the instrument safely.
Guide on how to safely replace the instrument's fuse.
Procedure for setting and using constant voltage output mode.
Procedure for setting and using constant current output mode.
Steps to diagnose and resolve power-on issues.
Troubleshooting steps for abnormal CV output.
Troubleshooting steps for abnormal CC output.
Specs for OVP/OCP, programming speed, temp coefficient, and stability.
To Next Page
