Rigol DP832 Firmware Upgrade Instructions

Page 1
DP800 FW Upgrade Instructions for Versions < 00.01.09
Date: 02.03.2015
Solution: The DP800 firmware can be upgraded very easily by following this process:
1. Check the current bootloader and firmware revision by pressing Utility >
Sys Info to show basic info:

Rigol DP832 Specifications

General

Number of Outputs	3
Output Voltage Range CH1/CH2	0-30V
Output Voltage Range CH3	0-5V
Output Current Range CH1/CH2	0-3A
Output Current Range CH3	0-3A
Total Power	195 W
Power per Channel CH1/CH2	90 W
Power per Channel CH3	15 W
Voltage Resolution	1 mV
Current Resolution	1 mA
Interfaces	USB, RS232
Display	3.5 inch TFT LCD