Need help?Do you have a question about the Rigol DP932E and is the answer not in the manual?
General| Output Channels | 3 |
|---|---|
| Output Voltage Range (CH3) | 0-5V |
| Output Current Range (CH1/CH2) | 0-3A |
| Output Current Range (CH3) | 0-3A |
| Power (CH1/CH2) | 90 W |
| Power (CH3) | 15 W |
| Power Rating | 105 W |
| Voltage Resolution | 1 mV |
| Current Resolution | 1 mA |
| Output Voltage Range (CH1/CH2) | 0-30V |
| Display | LCD |
| Programming Interface | USB, RS232 |
| Ripple & Noise (CV) | ≤ 1 mVrms |
| Ripple & Noise (CC) | ≤ 3 mVrms |
General safety precautions for operating the instrument to avoid injury or damage.
Explains warning and caution notices and safety symbols used in the manual.
Details the measurement categories relevant to the instrument's usage.
Guidelines for ensuring adequate airflow and preventing overheating.
Specifies operating temperature, humidity, and altitude limits.
Steps for inspecting packaging, instrument, and accessories upon receipt.
Procedure for connecting the instrument to AC power.
Procedure for turning on the instrument and verifying its startup status.
Instructions for connecting loads to the instrument's output terminals.
Explains how to set and use the overvoltage protection feature.
Details the overcurrent protection settings and functionality.
Solutions for issues where the instrument fails to power on.
Troubleshooting steps for abnormal constant voltage or current output.
Solutions for problems with USB storage device detection.
Details the number of output channels available for each model.
Specifications for DC output voltage, current, and protection ranges.
Specifications for load/line regulation, ripple, and noise.
Accuracy specifications for programming, readback, and display parameters.
To Next Page
