10
Analyzer
DP900 series power supply provides the Analyzer function for you to analyze the
quality of output signals. Available analysis functions for the 3 channels include
common analysis, pulse current analysis (only for CH1 and CH2), and data logging.
You can press the front-panel
or tap > Analyzer to access the Analyzer
main interface, as shown in the figure below. The label at the upper-left of the
interface indicates the currently selected analysis function (common analysis/pulse
current analysis). The four function keys at the right side allow you to easily configure
the Analyzer settings, execute analysis, print screen, and control labels.
Figure 10.1 Analyzer Main Interface
10.1 Common Analysis
In the Analyzer main interface, tap QicSet to access the quick setup interface. Then
tap
Common to enter the common analysis setting interface, as shown in the figure
below. In this interface, you can select the object to analyze and statistical method.
Analyzer
DP900 User Guide
48
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
To Next Page
Loading...
Need help?
General
