Need help?Do you have a question about the Rigol DP1308A and is the answer not in the manual?
General| Number of Outputs | 3 |
|---|---|
| Display | LCD |
| Voltage Resolution | 1 mV |
| Current Resolution | 1 mA |
| Interfaces | USB, RS232 |
| Channels | 3 |
| Interface | USB, RS232 |
| Display Size | 4.3 inch |
| Output Voltage Range | 0-30V |
| Ripple and Noise | < 1 mVrms |
| Channel 1 Voltage Range | 0 to 30 V |
| Channel 2 Voltage Range | 0-30V |
| Channel 2 Current Range | 0-1A |
| Channel 3 Voltage Range | 0-30V |
| Channel 3 Current Range | 0-1A |
| Power | 90 W |
| Ripple and Noise (CV) | < 1 mVrms |
| Ripple and Noise (CC) | ≤3mArms |
Specifies using only the power cord designed for the instrument and authorized by local country.
Emphasizes grounding the instrument through the power cord's grounding conductor.
Advises connecting output wires according to operation methods in the guide.
Recommends observing all ratings and marks on the instrument to avoid hazards.
Prohibits operating the instrument with covers or panels removed.
Instructs to use fuses with specified voltage and current ratings.
Warns against touching exposed connections and components when the power is on.
Recommends inspection by qualified personnel if suspected damage occurs.
Highlights the importance of adequate ventilation to prevent overheating.
Advises against operating the instrument in humid environments to prevent shock.
Warns against operating in explosive atmospheres to prevent damage or injury.
Explains how to configure and enable constant voltage output for the instrument's channels.
Describes the procedure for setting up and activating constant current output on the DP1308A.
Details the process of accessing and operating the instrument remotely via a web interface.
Provides steps to diagnose and resolve issues where the instrument screen remains dark.
Lists the DC output characteristics, including voltage, current, and protection ranges for all channels.
Details the instrument's ability to maintain stable output voltage and current under varying load conditions.
Describes how the output voltage and current remain stable despite fluctuations in the input line voltage.
To Next Page
