Safety Notices
Review the following safety precautions
carefully before operating the
instrument to avoid any personal injuries
or damages to the instrument and any
product connected to it. To prevent
potential hazards, do use the instrument
specified by this user’s guide only.
Use Proper Power Cord.
Only the power cord designed for the
instrument and authorized by local
country could be used.
Ground the Instrument.
The instrument is grounded through the
grounding conductor of the power cord.
To avoid electric shock, the instrument
grounding conductor(s) must be
grounded properly before connecting
the input or output terminals.
Connect Output Wire Correctly.
Please connect the output wire in strict
accordance with operation methods in
this guide.
Observe all Terminal Ratings.
To avoid fire or shock hazard, observe all
ratings and marks on the instrument.
Consult your manual for more
information about ratings before
connecting.
Do Not Operate Without Covers.
Do not operate the instrument with
covers or panels removed.
Use Proper Fuse.
Please use the fuse with specified
voltage and current rating.
Avoid Circuit or Wire Exposure.
Do not touch exposed connections and
components when power-on.
Do not Operate with Suspected
Failures.
If suspected damage occurs to the
instrument, have it inspected by
qualified service personnel before
further operations.
Keep Well Ventilation.
Inadequately ventilated will cause the
temperature rises or damages to the
device. Please keep well ventilation and
inspect the intake and fan regularly.
Do not Operate in Wet/Damp
Conditions.
In order to avoid short circuit to the
interior of the device or electric shock,
please do not operate in a humid
environment.
Do not Operate in an Explosive
atmosphere.
In order to avoid damages to the device
or personal injury, please operate far
away from an explosive atmosphere.
To Next Page
Loading...
Need help?
General
