General Inspection
Please inspect your new DP1308A programmable linear DC power supply according to
the following steps:
1． Inspect the shipping container for damage.
Keep the damaged shipping container or cushioning material until the contents
of the shipment have been checked for completeness and the instrument has
been checked mechanically and electrically.
If the shipping container is damaged, or the protective material shows signs of
stress, notify the carrier as well as your RIGOL sales representative. Keep the
shipping materials for the carrier’s inspection.
2． Inspect the instrument.
In case of any damage, or defect, or failure, notify the RIGOL sales
representative.
RIGOL offices will arrange reparation or replacement at RIGOL’s option
without waiting for claim settlement.
3． Check the accessories.
Accessories supplied with the instrument are listed in “Appendix A: DP1308A
Accessories” at of this guide.
If the contents are incomplete or damaged, please notify the RIGOL sales
representative.
To Next Page
Loading...
