Tracking Output
The ± 25V channel provides tracking output function, which denotes that the voltage
of a channel can vary with the one of another channel.
Select a channel such as +25V, and then press Track, at present, a hint “Track will
change the output of channel possibly, do you go on?”, then click OK, the button will
light and a track icon appears at the lower left of +25V that denotes +25V is
in tracking mode.
Figure 2-16 Tracking output (before tracking)
Next, change the voltage of -25V channel, and then the voltage of +25V channel
changes along with it*. For example: Change the voltage of -25V channel to 2.5V, the
voltage of +25V channel is also changed to 2.5V, please see the figure below.
Figure 2-17 Tracking output (after tracking)
Press Track again to disable track function and the light is out.
To Next Page
Loading...
