Rigol DP831A Firmware Upgrade Instructions

Page 4
12. When three elipses (…) are viewed on the display, Press the Help key to
place the unit into Upgrade Mode. This is indicated on the display.
13. Power cycle the DP800.
14. After the boot loader program is updated, the instrument will indicate that
you can power cycle.
15. Press the “help” button twice to bring up the help menu screen
16. Press M4>M2>M1 buttons to update analog board 1.

Rigol DP831A Specifications

General

Brand	Rigol
Model	DP831A
Category	Power Supply
Language	English