RIGOL
II RP1000D User’s Guide
General Safety Summary
Please review the following safety precautions carefully before
putting the instrument into operation so as to avoid any personal
injuries or damages to the instrument and any product connected to
it. To prevent potential hazards, please use the instrument only
specified by this manual.
Ground The Instrument.
The instrument is grounded through the Protective Earth lead of the
power cord. To avoid electric shock, it is essential to connect the
earth terminal of power cord to the Protective Earth terminal before
any inputs or outputs.
Observe All Terminal Ratings.
To avoid fire or shock hazard, observe all ratings and markers on the
instrument and check your manual for more information about
ratings before connecting.
Do Not Operate Without Covers.
Do not operate the instrument with covers or panels removed.
Avoid Circuit or Wire Exposure.
Do not touch exposed junctions and components when the unit is
powered.
Do Not Operate With Suspected Failures.
If you suspect damage occurs to the instrument, have it inspected
by qualified service personnel before further operations. Any
maintenance, adjustment or replacement especially to circuits or
To Next Page
Loading...
