Rigol DS1074Z - Waveform:source

RIGOL Chapter 2 Command System
2-134 DS1000Z Programming Guide
Command List:
 :WAVeform:SOURce
 :WAVeform:MODE
 :WAVeform:FORMat
 :WAVeform:DATA?
 :WAVeform:XINCrement?
 :WAVeform:XORigin?
 :WAVeform:XREFerence?
 :WAVeform:YINCrement?
 :WAVeform:YORigin?
 :WAVeform:YREFerence?
 :WAVeform:STARt
 :WAVeform:STOP
 :WAVeform:PREamble?
:WAVeform:SOURce
Syntax :WAVeform:SOURce <source>
:WAVeform:SOURce?
Description
Set or query the channel of which the waveform data will be read.
Parameter
Name
Type
Range
Default
<source> Discrete
{CHANnel1|CHANnel2|
CHANnel3|CHANnel4|MATH}
CHANnel1
Explanation
If the MATH channel is selected, only NORMal can be selected in :WAVeform:MODE.
Return
Format
The query returns CHAN1, CHAN2, CHAN3 or CHAN4.
Example
:WAVeform:SOURce CHANnel2 /*Set the channel to CH2*/
Related
Command
:WAVeform:MODE