Need help?Do you have a question about the Rigol DS7054 and is the answer not in the manual?
General| Bandwidth | 500 MHz |
|---|---|
| Channels | 4 |
| Vertical Resolution | 8 bits |
| Timebase Range | 1 ns/div to 1000 s/div |
| Max Input Voltage | 400 V (DC + AC peak) |
| Operating Temperature | 0°C to +50°C |
| Display | 10.1 inch color LCD |
| Input Impedance | 1 MΩ ± 1% |
| Trigger Types | Edge, Pulse, Slope, Video, Pattern, Duration, TimeOut, Runt, Window, Delay, Setup/Hold, Nth Edge, Serial |
| Serial Bus Triggering and Decoding | I2C, SPI, UART, CAN, LIN |
| Interfaces | USB Host, USB Device, LAN, HDMI |
| Input Coupling | DC, AC, GND |
General safety precautions before operating the instrument.
Lists the key features and capabilities of the MSO7000/DS7000 series.
Description of the oscilloscope's front panel controls and indicators.
Selects the signal source for triggering.
Adjusts the trigger level or threshold for signal detection.
Sets the trigger mode (Auto, Normal, Single).
Automatically measures waveform parameters.
Defines a mask region for pass/fail testing.
Configures remote communication interfaces (USB, LAN, GPIB).
Instructions for controlling the oscilloscope via USB.
Instructions for controlling the oscilloscope via LAN.
Instructions for controlling the oscilloscope via GPIB.
Troubleshooting steps for launch issues.
Solutions for issues with no waveform display.
Troubleshooting steps for touch screen issues.
To Next Page
