RIGOL Chapter 1 Quick Start
1-8 MSO7000/DS7000 User Guide
methods to connect the signal under test. For details, refer to
RPL2316 Logic
Probe User Guide
.
Figure 1-9 To Connect the Logic Probe
Note:
âš« Before you connect the logic probe to the signal under test, connect logic
probe's adapter provided in the accessories to its corresponding channel group.
âš« The digital channel input terminal does not support hot plugging. Please do not
insert or pull out the logic probe when the instrument is in power-on state.
To Next Page
Loading...
Need help?
General
