EasyManuals Logo

Riken Keiki GX-8000 User Manual

Riken Keiki GX-8000
46 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
1 Outline of the Product 1-1. Preface
GX-8000 -2-
1
Outline of the Product
1-1. Preface
Thank you for choosing our portable gas monitor GX-8000 (Type LEL). Please check that the model
number of the product you purchased is included in the specifications on this manual.
This manual explains how to use the gas monitor and its specifications. It contains information required for
using the gas monitor properly. Not only the first-time users but also the users who have already used the
product must read and understand the operating manual to enhance the knowledge and experience before
using the gas monitor.
1-2. Purpose of use
This product is a gas monitor used to detect combustible gases (%LEL) in the air.
Detection results are not intended to guarantee life or safety in any way.
Check the specifications before use and conduct gas detection properly in accordance with purposes.
In addition to this operating manual, an operating manual for the data logger management program (option)
is available for the gas monitor. Contact RIKEN KEIKI if it is needed.
1-3. Definition of DANGER, WARNING, CAUTION, and
NOTE
DANGER
This message indicates that improper handling may cause serious damage on
life, health or assets.
W
ARNING
This message indicates that improper handling may cause serious damage on
health or assets.
CAUTION
This message indicates that improper handling may cause minor damage on
health or assets.
NOTE
This message indicates advice on handling.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Riken Keiki GX-8000 and is the answer not in the manual?

Riken Keiki GX-8000 Specifications

General IconGeneral
DisplayLCD with backlight
Operating Humidity0 to 95% RH (non-condensing)
Ingress ProtectionIP67
CommunicationUSB
Gas TypeO2, H2S, CO
Detection PrincipleCatalytic combustion, Electrochemical cell
Power SourceRechargeable battery
Operating Temperature-20°C to 50°C (-4°F to 122°F)
Alarm Set PointsUser adjustable
Response TimeWithin 30 seconds
CertificationsATEX, IECEx, CSA
AlarmsVisual, Audible, and Vibration
Data LoggingYes
Detection RangeCombustibles: 0-100% LEL, CO: 0-500 ppm, H2S: 0-100 ppm

Related product manuals