Riley RS1 - 2.4 Folding Instructions; 2.5 Uninstall;Install the Battery

13 14
2.4. Folding instructions 2.5 Uninstall/Install the battery
Uninstall
1. Push/slide the
button up.
2. Pull the clip rmly
away from the stem,
while pushing the
stem down.
3. Fold the stem
towards the rear.
4. Align the hook
with the fender clip
on the rear fender
and press down till
it clicks.
1. Push battery
clip in and hold.
2. Push the
battery up, away
from the bottom
of the stem.
3. After pushing
the battery
up, pull it out
horizontally.
1. Insert the battery
horizontally into the
pole, while pushing
the battery clip in.
2. When in, let
go of the battery
clip, and push the
battery down
until rmly
secure.
Install