Riley RS1 - 3. How to Ride the E-Scooter

15 16
3. How to ride the e-scooter
Wear a helmet, knee pads
and elbow pads when you
learn to ride the e-scooter.
1. Press the POWER
button for two seconds.
2. Put one foot on the
base plate and push off
the ground with your
strong leg.
3. Balance both feet on
your e-scooter when you
have enough momentum.
4. Press the THROTTLE
slightly with your right
hand to start and rotate
the handlebars to turn.
5. Continuously press the
throttle to speed up.
6. Apply pressure to the
brake lever to slow down
or stop.
7. When the e-scooter
stops or runs at a slow
speed, you can get off.