Riley RS2 - Charging Instructions; Specifications; Scooter and Charger Specifications

19 20
5. Specication
4.3 Charging instructions
Open the charging port cover, make sure the charging port is clean
and dry.
Connect the charger to the battery and the plug to a power source
(100V-240V; 50/60Hz). Make sure the charging light is on.
When the charger indicator is green, charging is complete.
Charging method 1: Charging method 2:
Charging
port
Battery
connector
Charging
port
Tips:
Connect the charger to the AC power rst, then connect it to the
battery.
After charging, cover with the dustproof rubber to prevent
anything from entering the charging port and causing battery
failure.
Product
Scooter Specification
Unfolded size 1131x450x1179mm
Folded size 1131x450x475mm
Height from baseplate to ground 115mm
Net weight 15.7kg
Tyre Size
10 inch pneumatic air tyre with
inner tube
Tyre pressure 35 P.S.I. (2.41 Bar)
Waterproof level IPX4
Basic Information
Battery Capacity 36V/8.7AH
Motor power 350W
Mileage per charge 28 miles (45km)
Max speed 15.5 mph (25km/h)
Max loading 120kg
Climbing angle 15°
Driving modes 3 (beginner, eco, sport)
Charger Specification
Input voltage 100-240V
Frequency 50-60Hz
Output voltage 42V
Output current 1.5A/2A
Store temperature -10°C - 35°C