11 12
2.2 Operation of buttons
Brake lever
Function button
Power switch
Throttle button
Speed
Multifunction
Gear
Unit display
Fault display
Power
LED display
Power Switch: Press and hold
the power button to turn on/off.
Function button:
A. Press function key to switch
riding modes.
Beginner mode (10km/h limit)
Gear indicator is not displayed.
Normal mode (15/h limit)
Gear indicator shows white.
Sports mode (25km/h limit)
Gear indicator shows red.
B. Press the power button twice
to turn the headlights on/off.
The tail lights are always on.
Throttle: Press down the throttle
button to accelerate.
Brake: Apply pressure to the
brake lever to brake. Lightly step
on the rear fender to assist the
brakes.
Cruise mode: Maintain a set
speed for 6 seconds to enter
the cruise mode. Exit the cruise
mode by pressing down the
throttle again, or by braking.
1. Pull up the stem
towards the front
wheel.
2. Fold clip in
rmly, ensuring it
clicks and button
is tight.
3. Secure the two
wires together
inside the stem.
4. Attach headset
to the stem, then
screw in 2 screws
each side using the
Allen key provided.
Note: If the
mechanism
becomes loose,
tighten the screw
accordingly.
2.3 Assembly instructions
To Next Page
Loading...
