P a g e | 21
1800 MY RILU www.rilu-e-bike.com.au
Pedal Sensor – No Motor Power
PAS Sensor – Error Gap
If the sensor becomes misaligned it is possible that your pedal motion
may not be detectible. This will cause interment (or no motor power)
output to occur.
Diagnosing - Faulty PAS Sensor
If you are riding the bike in Level 1 – 5 and do not experience any motor power.
Step 1 - Stop riding the bike
Step 2 - Step of the bike and stand beside it
Step 3 - Hold the – (Down) button on the Display to activate 6Km/h walk function
Step 4 - If the motor only works using 6km/h please contact dealer for servicing.
Step 5 - If the motor does not turn using either 6km/h walk assist or Level 1 – 5
when pedalling please check motor cable is connected correctly and tightly
To Next Page
