Rilu E-Glider 7D User Manual

P a g e | 1
1800 MY RILU www.rilu-e-bike.com.au
USER MANUAL
E-Glider 7D
Unit 2 - #2 Caulson Close
Maribyrnong 3032
Melbourne, Victoria
Australia
1800 MY RILU
info@rilu-e-bike.com.au
Rev.09082019.E7D-UM
P a g e | 2
1800 MY RILU www.rilu-e-bike.com.au
Introduction
Product Description Page 4
Riding Range Page 5
Weight Page 5
Product Summary Page 6
General Usage Summary Page 7
Display
Turning E-Glider 7D (ON & OFF)
Page 8
LCD will not power on?
Page 8
Default Motor Assistance Level
Page 9
Turn “ON” LCD Backlight & Bike Lights Page 9
PAS Level Settings Page 9
Easy Start Page 10
Display - Error Codes Page 11
Stem
Adjusting Stem Page 12
Gearing
Adjusting - Gear Quick Adjustment Page 13
Gearing Adjustment - Uneven Shifting / Slipping
Page 14
Gear Alignment –
Gear #7
Page 15
Gear Alignment
– Gear #1
Page 16

Rilu E-Glider 7D Specifications

General

Motor Power	350W
Battery	36V 7.5Ah
Max Speed	25 km/h
Max Load	100 kg
Weight	12 kg

Summary

Product Description

Motor

Specifies the motor as 36V / 250 W (High Torque).

Battery

Details the battery as 36 V / 13AH (Lithium Ion LG).

Charger

Riding Range & Charge Time

Product Summary

Easy Start Throttle

Explains the thumb-triggered throttle for speeds up to 6km/h without pedalling.

PAS

Describes the Pedal Assistance Sensor (PAS) and its 0-5 level settings.

Turning E-Glider 7D (ON & OFF)

LCD will not power on?

Default Motor Assistance Level

PAS Level Settings

Easy Start

Gearing Adjustment - Uneven Shifting / Slipping

Motor - Change Tire Notes

Motor – Service Notes

Battery – Safety Notes

Battery – Locking

Battery - Capacity Bar

Battery – Storage

Battery - Charger Warnings

Battery – Charging Error

Pedal Sensor – No Motor Power

Diagnosing - Faulty PAS Sensor

Steps to diagnose a faulty Pedal Assistance Sensor (PAS).

Replacing - Faulty PAS Sensor