Rilu E-Glider 7D - Product Summary; Easy Start Throttle; PAS

P a g e | 11
1800 MY RILU www.rilu-e-bike.com.au
Display - Error Codes
Please take note of the number below
the ERR flashing warning on your LCD.
Cross check it with the error code table
and contact your dealer if you are unable
to resolve the error.
Display - RESET TRIP
Error code # Fault
21 CONTROLLER DAMAGED - REPLACE
22 Throttle – Unplug Throttle cable
23
M
otor
phase
–
CHECK MOTOR CABLE
24 Motor Hall – CHECK MOTOR CABLE
25 eABS Sensor ON – CHECK BRAKE CABLE
30 DISPLAY COMM ERROR – CHECK CABLES
Hold
“
+ &
-
”
Press “ + ”
Changes “ tC – Y ”
Hold “ M ”
Save & Exit
P a g e | 12
1800 MY RILU www.rilu-e-bike.com.au
Adjusting - Stem
When adjusting height
RAISE BELL
check you
DO NOT EXCEED
the line marked
|||||||||
-10⁰ - +50⁰
Adjustable range