EasyManua.ls Logo

Rilu E-Glider 7D - Product Summary; Riding Range

Rilu E-Glider 7D
14 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
P a g e | 5
1800 MY RILU www.rilu-e-bike.com.au
Riding Range & Charge Time
Range depending on:
Rider, terrain, weather & Assist level.
PAS 40Km 100km
Battery charge time is 5-6 hours
Weight
20.5 Kg (Bike) net weight
23 Kg (Battery Installed)
eGlider 7D Rated Load weight is 125Kg
P a g e | 6
1800 MY RILU www.rilu-e-bike.com.au
Product Summary
Congratulation on your purchase of a RILU E-Glider 7D low
step electric bicycle.
Your new electric bicycle has two different ways of
activating motor power.
Easy Start Throttle
Located on the left hand side of the handlebar is a thumb
triggered throttle which enables you to control the speed
of the motor up to 6km/h without the need for pedalling.
PAS
Built into your E-Glider 7D is a “Pedal Assistance Sensor”.
This automatically detect the speed at which you pedal
and moderates the ‘motors speed’ while riding.
By selecting from PAS 0 – 5 on the LCD display you are
able to adjust the amount of ‘motor output power that is
automatically given when pedalling is detected by the
PAS.

Related product manuals