Rimage 480i Setup And Installation

110762-000 Rev. B Page 1
Connecting the Power Cord
Installing the Ink Cartidges
Rimage 480i Setup and Installation
Power on the printer.
Lift the access door.
Remove the side cover.
Connect the power cord
to the AC power adapter.
Connect the AC power adapter
to the printer.
Connect the AC power adapter
to the printer.
Connect the power cord to an outlet.
AC Power
Adapter
Power Cord
After the printer has stopped
moving, lift both cartridge latches.
Slide the matching ink cartridge into
the cradle as shown.
Close each cartridge latch.
Close the access door.
Cradle
Important! Connect the USB cable only when
the software prompts you to connect it!

Rimage 480i Specifications

General

Brand	Rimage
Model	480i
Category	Printer
Language	English