Maintain the Rimage 480i Printer
Use the information in this document to keep your Rimage 480i printer in optimum operating condition.
Regular preventative maintenance of your Rimage 480i printer can help to ensure clean printed labels.
Maintenance involves cleaning the ink cartridges, aligning the ink cartridges, cleaning the printer exterior,
replacing the fan filter, and replacing the ink cartridges.
n Caution: To avoid damaging the Rimage 480i printer during maintenance:
y Never use oils, silicone, or other lubricants on any part of your Rimage 480i printer.
y Use only non-abrasive cleaners to wipe down the surfaces of your Rimage 480i printer.
y Do not pour cleaner directly onto your Rimage 480i printer. Instead, apply the cleaner to a lint-free cloth
first.
y When you spray compressed air, make sure that no liquid drips into your printer.
Preventative Maintenance Schedule
- Important! Failure to follow the maintenance schedule outlined below may void your warranty.
Materials Task Frequency
Mandatory
Lint-free cloth
Non-abrasive, all-purpose
cleaner
Clean the printer exterior. Refer to the
Clean the Printer Exterior instructions.
Weekly
New fan filter
Small screwdriver
Replace the fan filter. Refer to the
Replace the Fan Filter instructions.
Monthly
New ink cartridges Replace the ink cartridges. Refer to the
Replace the Ink Cartridges instructions.
As needed
Can of compressed air
Remove dust from the printer. Refer to
the Remove Dust from the Rimage 480i
Printer instructions.
Monthly
Optional
None needed Clean the ink cartridges. Refer to the
Clean the Ink Cartridges instructions.
When print quality problems are
noticed
None needed Align the ink cartridges. Refer to the
Align the Ink Cartridges instructions.
As needed
Note: The ink cartridges are
aligned at the factory.
110761_D
To Next Page
Need help?
General
