ring Base Station Basic Setup

Ring Base station – Lifeline
Association
This base station has Group 1 is the “Lifeline” group, which can hold one devices. Base station will send device reset locally
notification to this group.
Ring Base station – Reset
Factory Default Instructions
1. Using a paper clip press and hold the reset button
2. Wait for the network and power LEDs on the back to start to blink amber color
3. Release the reset button
Use this procedure only in the event that the network primary controller is missing or otherwise inoperable.

ring Base Station Specifications

General

Operating Temperature	32°F to 104°F (0°C to 40°C)
Connectivity	Wi-Fi
Backup Battery	24-hour backup
Siren	104 dB
Compatibility	Ring Alarm devices, select Z-Wave devices
Power Source	Plug-in AC Adapter