ring Base Station - What is Professional Monitoring?; The Alarm System; The Central Monitoring Station; Sensors: Faulted or Cleared

Note: Joining another Z-wave network via learn mode is available only when the base station is not already paired to any other
devices
Ring Base station – Exclusion
Removing a Base station to a Z-Wave Network
Exclusion Instructions:
1. Start exclusion mode on the primary controller
2. From the application’s UI, navigate to controller’s device setting screen -> select Advance options -> Select Z-wave from “Protocol
Adapters” and Select “Learn Mode” – DSK will be displayed
3. Select “Begin Learn Mode” in the UI
4. When the exclusion process in complete, the LED on the base station will be solid blue