2. Install your Steplight.
Insert screws.
Drive the two mounting screws, leaving ~1/4” exposed.
Attach the lid.
Push the lid back onto your
Steplight, and secure it with the
screws you removed earlier.
Mount Steplight.
Place your Steplight over
the mounting screws and
slide downward to lock it
in place.
Mark the spots.
Mark the screw holes.
Using the guide below, make a mark on the mounting
surface below each arrow.
If installing on a masonry surface, drill pilot holes and
insert the included anchors.
7
To Next Page
Loading...
