2 Rinnai Corporation Conversion Manual
Safety Symbols
Indicates an imminently hazardous situation which, if not avoided, will result in death or
serious injury.
Indicates a potentially hazardous situation which, if not avoided, could result in death or
serious injury.
Indicates a potentially hazardous situation which, if not avoided, could result in minor or
moderate injury. It may also be used to alert against unsafe practices.
This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and
others.
DANGER
CAUTION
WARNING
English
Technical Data ............................. 3
Parts List ...................................... 3
Gas Conversion Procedure .......... 4
Adjust Gas Pressure Settings ... 5-6
Check Operation .......................... 7
Operating Instructions .................. 8
Français ....................................... 9
Données Techniques .................... 3
Liste des Pièces ........................... 3
Procédure de conversion du gaz
................................................... 11
Ajustez la pression de gaz ..... 12-13
Vérifiez Fonctionnement ............. 14
INSTRUCTIONS DE MISE EN MARCHE
................................................... 15
FOR INSTALLATIONS IN CANADA, THE CONVERSION SHALL BE CARRIED OUT IN ACCORDANCE WITH
THE REQUIREMENTS OF THE PROVINCIAL AUTHORITIES HAVING JURISDICTION AND IN ACCORDANCE
WITH THE REQUIREMENTS OF THE CGA-B149.1, NATURAL GAS AND PROPANE INSTALLATION CODE.
The appliance must be installed in accordance with:
local codes or, in the absence of local codes, the National Fuel Gas Code, ANSI Z223.1/
NFPA 54 and/or CSA B149.1, Natural Gas and Propane Installation Code.