• Push Button - Requires two (2) CR2450 watch
batteries
• Motion Sensor - Requires one (1) 2600mAh AA size
Lithium-Thionyl Chloride battery (3.6V or 3.7V)
Pair the Push Button or Motion Sensor to the module.
You Will Need:
• Control-R™ Module
• Push Button and/or Motion Sensor
• Phillips Head Screwdriver (Motion Sensor only)
❶
❷
Ensure the module LED has been red for at least
1 minute prior to beginning the pairing process.
To Next Page
Loading...
