Need help?Do you have a question about the Rinnai Energysaver RHFE-1004T and is the answer not in the manual?
General| Model | RHFE-1004T |
|---|---|
| Gas Type | Natural Gas or Propane |
| Efficiency | 82% |
| Ignition Type | Electronic Ignition |
| Electrical Requirements | 120V AC, 60Hz |
| Hot Water Flow Rate | Not Applicable |
| Venting | Direct Vent |
Describes the location of controls and indicators on the unit.
Explains the process of turning the heater on and off.
Details how to set and change the desired room temperature.
Describes the energy-saving feature that reduces temperature over time.
Explains how to activate and deactivate the child lock feature.
Instructions for filling and using the humidifier tray for air moisture.
Guidance on cleaning the fan filters and the filter indicator.
Information regarding steam discharge and installation requirements for the flue.
Guidance on wiring the appliance to the mains electrical supply.
Shows electrical connections for multiple appliances with a timer.
Details how to position the flue terminal and available flue sizes.
Instructions on how to use the provided template for accurate installation.
Steps for fitting the flue sleeve and manifold to the unit.
Information on parts and installation of extension kits for the flue.
Steps for initial setup, ignition checks, and operational testing.
Procedure for setting the correct gas pressure for operation.
Steps to convert the appliance for different gas types.
Guidance on regular maintenance and cleaning of the unit.
Points to check before calling for service to diagnose issues.
Explains error codes displayed and their remedies.
Details the operation of overheat switches and flame failure devices.
Provides detailed measurements of the heater unit.
Illustrates the internal electrical wiring of the appliance.
Lists key technical data, input, gas control, and fan details.
Outlines the warranty terms and conditions for parts and labour.
Provides contact details for Rinnai UK Ltd. for support.
To Next Page
