What to do if my Rinnai Heater has a power failure?
- TTerry CareyJul 27, 2025
If your Rinnai Heater experiences a power failure, push the On/Off button to attempt a restart after power is restored.
What to do if my Rinnai Heater has a power failure?
If your Rinnai Heater experiences a power failure, push the On/Off button to attempt a restart after power is restored.
Model | EX38C |
---|---|
Fan Speed | Variable |
Ignition | Electronic |
Fuel Type | Natural Gas |
Temperature Control | Thermostat |
Safety Features | Flame Failure, Overheat |
Procedures for detecting and responding to gas leaks.
Explains safety symbols, hazard levels, and safe usage guidelines.
Details appliance ratings, dimensions, weight, noise level, and safety features.
Highlights functionalities like programmable thermostat, child lock, and energy saving mode.
Describes the control panel buttons, display, and features like Child Lock.
Instructions for setting the clock and programming timer schedules for operation.
Procedures for cleaning filters, the exterior, and inspecting the flame.
Steps to diagnose common issues before contacting a service technician.
List of displayed fault codes, their causes, and recommended remedies.
Key warnings, codes, and general advice for installation.
Proper gas connection procedures and required distances from flammable materials.
Diagram illustrating minimum clearances for flue terminal placement.
Diagrams showing the physical dimensions of the appliance in inches and millimeters.
List of parts included with the appliance for installation, with quantities.
Steps for disassembling, adjusting sleeve length, and attaching the flue manifold sleeve.
Steps to connect flue adapter, air inlet, back spacer, and level the appliance.
Table and procedure for setting manifold gas pressure based on conditions.
Steps to safely start, operate, and turn off the appliance, including manual valve operation.
Illustrates the internal components of the furnace with labels.
Shows the electrical connections, wire codes, and parts identification for the unit.
Illustrates the control logic and circuit functions of the appliance.
Identification and part numbers for major external and internal components.
Explains what the warranty covers, period of coverage for different parts.
How to get service, what is not covered, and warranty limitations.
Specific regulations for Massachusetts, including CO detectors and signage.