Rinnai Energysaver RHFE-556T User Manual

Installation and User Manual
RHFE-556T
RHFE-556T
Energysaver
Ñ
Space Heater
Operation and Use - Page 2
Installation - Page 12
Important.
Read these instructions carefully before attempting installation or use of
this appliance. All work must be carried out by competent persons.

Rinnai Energysaver RHFE-556T Specifications

General

Brand	Rinnai
Model	Energysaver RHFE-556T
Category	Heater
Language	English

Summary

Rinnai Warranty of Quality

Getting to Know Your New RHFE-556T

Control Panel Layout

Features

Safety Points

Operating Your New RHFE-556T

Room Temperature Adjustments

Caring for Your New RHFE-556T

Pre-Service Check

Error Messages

Installation Instructions

Specification

Location

Positioning the Flue Terminal

Sleeve and Manifold Installation

Method for Standard Walls

Details the procedure for installing the sleeve and manifold on standard walls.

Fitting Unit

Air Inlet Hose

Instructions for connecting the air inlet hose to the unit.

Locking Clamp, Screw Clamp and Insulation

Details on fitting the locking clamp, screw clamp, and insulation.

Connecting Gas and Electrical Services

Gas Conversion

Testing

Pressure Checking Procedure

Procedure for checking gas pressure and appliance operation.

Fitting Top Spacer + Wall Clip

Secure Heater to Wall

Instructions for securing the heater to the wall bracket.

Instruct Customer on Use of Heater

Guidance on explaining the heater's operation to the customer.

Fault-Failure Procedure

Procedure to follow if the heater cannot be operated correctly.

Block and Wiring Diagram

Forced Flue Heater Extension Kits

Cautions

Dimensions

Service Contact Point