EasyManuals Logo

Rinnai Enviroflo User Manual

Rinnai Enviroflo
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
Important
This hot water system shall be installed in accordance with:
- Manufacturer’s installation instructions
Current:
- AS/NZS 3000 Electrical Standards
- AS/NZS 3500 Plumbing and Drainage Standards
- AS/NZS 5149 Refrigerating Systems Operation
- AS/NZS 5125.1:2014 Heat Pump Water Heaters
Appliance must be installed, commissioned, serviced, and removed by
authorised personnel.
Not suitable as a spa or swimming pool heater.
Not suitable for hydronic applications.
Warning
Improper installation, adjustment, alteration, service or maintenance
can cause property damage, personal injury or loss of life.
For more information about buying, using, and servicing of Rinnai
appliances call: 0800 RINNAI (0800 746 624).
Rinnai New Zealand Limited
105 Pavilion Drive, Mangere, Auckland
PO Box 53177, Auckland Airport, Auckland 2150
Phone: (09) 257 3800
Email: info@rinnai.co.nz
Web: rinnai.co.nz
youtube.com/rinnainz
facebook.com/rinnainz

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Rinnai Enviroflo and is the answer not in the manual?

Rinnai Enviroflo Specifications

General IconGeneral
BrandRinnai
ModelEnviroflo
RefrigerantR134a or R290 (model dependent)
InstallationIndoor
Cooling CapacityNot applicable (primarily for water heating)
Energy Efficiency Ratio (EER)Not applicable
Refrigerant TypeR134a or R290 (model dependent)

Related product manuals