EasyManuals Logo

Rinnai Enviroflo User Manual

Rinnai Enviroflo
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
4 |
Safety and important messages
This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure they do not play with the appliance.
DO NOT modify this appliance
DO NOT touch power connections
DO NOT operate the unit unless the cylinder is full of water
DO NOT operate unless all covers are secured in place
DO NOT store items on top of or against the unit
Avoid touching exposed pipework and ttings connected to the unit as they can be HOT
To ensure continued safe operation, maintain the necessary clearances around the unit.
Warning about hot water
Excessively hot water is dangerous. The Rinnai Enviroo is set to operate in ‘Standard’ (STAN)
mode, with a water default temperature setting of 60 °C, it has a tempering valve to control the
temperature of hot water to safe levels.
Always
Test the water temperature with your elbow before placing your child
in the bath, and feel the water yourself before bathing or showering.
Supervise children whenever they are in the bathroom.
Make sure the hot water tap is turned o󰀨.
Consider
Installing child proof tap covers or child resistant taps, both will prevent a
child from being able to turn on a tap.
Never
Leave a toddler in the care of another child. They may not understand the
need to have the water temperature set at a safe level.
Hot pipe work
Care should be taken not to touch the pipe work from the cylinder as this
could be very hot.
Risk of re
The unit uses R290 (propane) refrigerant, a class 3 ammable gas according to
AS/NZS ISO 817. The refrigerant can only be handled by a refrigeration technician with
the appropriate refrigerant handling license.
If the refrigerant leaks
1
, there is a possibility of a re with an external ignition source
DO NOT store chemicals or ammable materials near this unit
DO NOT place the unit near any ignition sources
DO NOT use a ammable spray such as hair spray, spray paint etc. near this unit as it may
cause a re
DANGER BEWARE OF
SCALDING HAZARDS
HOT!
HOT!
1
The Rinnai Enviroo has a sealed refrigerant system, leaks will not be common unless the internal components of the
header have been punctured. If punctured a hissing sound could occur indicating a leak. Contact your installer or Rinnai
as soon as possible if this occurs.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Rinnai Enviroflo and is the answer not in the manual?

Rinnai Enviroflo Specifications

General IconGeneral
BrandRinnai
ModelEnviroflo
RefrigerantR134a or R290 (model dependent)
InstallationIndoor
Cooling CapacityNot applicable (primarily for water heating)
Energy Efficiency Ratio (EER)Not applicable
Refrigerant TypeR134a or R290 (model dependent)

Related product manuals