Rinnai HD210e Installation Manual

Rinnai FFPP (Polypropylene) Flue Systems
Flue Installation Manual
To Suit Rinnai Water Heater Models
HD210i (REU-N3237FFC-AK)
The flue components described within these instructions are
ONLY suitable for use with the model(s) that is listed above.
They are NOT suitable, nor are they approved for use with any
other Rinnai flued water heaters.

Rinnai HD210e Specifications

General

Maximum BTU Input	199, 000 BTU/hr
Minimum BTU Input	15, 000 BTU/hr
Category	Tankless
Fuel Type	Natural Gas
GPM at 70°F Rise	5.2 GPM
Temperature Range	98°F - 185°F
Vent Diameter	3"
Electrical Requirements	120V, 60Hz
Warranty	12-year heat exchanger, 5-year parts, 1-year labor
Ignition Type	Electronic