Rinnai HOTFLO User Manual

This appliance shall be installed in accordance with:
x Manufacturers Installation Instructions
x Municipal Building Codes
x AS/NZS 3000 Wiring Rules
x AS/NZS 3500.4 Plumbing and Drainage
x Any other local relevant Statutory Regulation
Installation and Service must be performed by an authorised person.
THIS APPLIANCE IS NOT SUITABLE FOR USE AS A POOL OR SPA HEATER.
Mains Pressure Vitreous Enamel
Electric Storage Water Heater
®
‘HOTFLO’ Operation / Installation Manual
Distributed and serviced in Australia under a Quality
System certified as complying with ISO 9001 by
SAI Global

Rinnai HOTFLO Specifications

General

Temperature Control	Electronic
Mounting	Wall-mounted
Type	Tankless
Installation	Indoor
Warranty	5 years on parts
Energy Source	Natural gas
Flow Rate	26.6 L/min
Temperature Range	37°C - 60°C