Rinnai HD55 Series User Manual

6
 Unplug, remove and inspect Fan Motor taking care not to damage the impellor. Clean
with a soft brush if required
NOTE: When removing the fan motor if the motor is face on then it will be 3 or 4 screws that hold it on to the
scroll box. If the fan motor is side on then you will have to remove the scroll box first before removing the motor,
this is usually two screws.
 Removing two screws will allow the burner box to be removed. Inspect and clean if
necessary turning upside down to ensure any debris can fall clear.
SERVICE

Rinnai HD55 Series Specifications

General

Brand	Rinnai
Model	HD55 Series
Category	Water Heater
Language	English