6 |
About your Pro Series unit
Front panel
Louvre
Remote
Display window
Remote control holder
(some units)
Filter
Modes of operation
AUTO
In this mode, fan speed, temperature and operational mode (cooling, dry, and heating) are all
adjusted automatically by the appliance, based on the current room temperature. In this mode you
cannot adjust the temperature, however the swing operations for air direction and the fan speeds
can still be adjusted.
COOL
When selected this mode operates the unit as a cooling appliance. The available range is 16 ~ 30 °C
in 0.5 °C increments. The fan speed defaults to that which was last used.
DRY (dehumidifying)
In periods of high humidity this mode removes excess moisture from the room, in order to prevent
mould and mildew. This mode adjusts the room temperature and fan speed automatically to
maintain the optimal level of humidity.
HEAT
When selected this mode operates the unit as a heating appliance. The available range is 16 ~ 30 °C
in 0.5 °C increments. The fan speed defaults to that which was last used.
FAN
This mode uses the fan to circulate air without changing the room temperature. In this mode swing
operations for air direction can still be adjusted.
Operation range limits
The table below indicates the temperature range the unit can operated within.
Mode Cooling mode Heating mode
Dry mode
Room temperature > 16 °C < 30 °C
> 16 °C
Outdoor temperature 0~50 °C -15~24 °C
0~50 °C
To Next Page
Loading...
Need help?
General
