Do you have a question about the Rinnai RC98E and is the answer not in the manual?
Brand | Rinnai |
---|---|
Model | RC98E |
Category | Water Heater |
Language | English |
Defines safety alert symbols like DANGER, WARNING, and CAUTION.
Provides essential practices for safe operation and handling of the appliance.
Details automatic shutdown and protection features like overheat and flame failure.
Lists and describes features of various Rinnai temperature controllers.
Lists available temperature settings for different models and options.
Offers suggested temperature settings for kitchen, shower, and bath fill.
Details how to set the default temperature using appliance switches.
Guides users on adjusting the voice prompt volume on controllers.
Lists the temperature settings available for the bath fill function.
Guides users on setting the desired water volume for bath fill.
Explains how to enable or disable controller beeps.
Guides users on setting the clock on the temperature controller.
Provides step-by-step instructions for cleaning the appliance components.
Specifies annual inspection requirements for the vent system.
Specifies annual inspection requirements for the air intake.
Notes that motors are permanently lubricated and need annual cleaning.
Advises using a damp cloth to clean the temperature controller.
Refers to flushing the heat exchanger for scale build-up issues (Error Code LC).
Explains how to display recent error codes and water flow/temperature data.
Discusses water quality parameters and their impact on the appliance.
Instructions for cleaning thermistors.
Covers safety, codes, material usage, and appliance location requirements.
Details how to securely mount the water heater to the wall.
Covers gas control valves, type, pressure, and leak testing.
Provides an example for calculating and selecting the correct gas pipe size.
Explains the function and installation of isolation and pressure relief valves.
Details the correct procedure for installing the pressure relief valve.
Advises on annual manual operation for checking the pressure relief valve.
Covers water control valves, pipe material, debris purging, and toxic chemicals.
Specifies requirements and installation considerations for the relief valve.
Explains the appliance's freeze protection features and optional solenoid valves.
Step-by-step guide to manually drain the water heater to prevent freezing.
Describes circulating low-volume water to prevent freezing.
Instructions on what to do if the unit or piping freezes.
Specifies rules for direct vent, component use, and termination locations.
Details condensate trap, drain line requirements, and potential issues.
Advises on suitable locations for installing temperature controllers.
Explains how to configure multiple temperature controllers for the unit.
Specifies the required cable gauge and maximum lengths for controllers.
Provides step-by-step instructions for physically mounting the controller.
Essential safety warnings and actions to take before operating.
Provides the sequence of steps to safely operate the water heater.
Instructions for safely shutting off the gas supply to the appliance.
Graph showing pressure drop versus water flow rate for different models.
Graph showing outlet flow rate versus temperature rise for different models.
Recommends temperature settings for domestic hot water and space heating.
Advises on pump selection for circulating water in heating systems.
Warns against using iron components due to potential clogging.
Emphasizes the need for qualified installers and specific state requirements.
Outlines Massachusetts regulations for CO detectors, signage, and inspection.
Details what information to keep for warranty and product registration.
Explains what the warranty covers and its duration for different parts.
Explains Rinnai's commitment to repair or replace defective products.
Guides users on how to contact Rinnai or authorized providers for service.
Lists common causes for warranty denial, such as improper installation or misuse.