To Next PageTo Next PageHow to fix no ignition / no gas supply on Rinnai Water Heater?
If your Rinnai Water Heater isn't igniting or has no gas supply, verify that the gas is turned on at the water heater, gas meter, or cylinder.
What to do if power interruption during Bath fill in Rinnai Water Heater?
If a power interruption occurs during a bath fill and water doesn't flow when power is restored to your Rinnai Water Heater, turn off all hot water taps and press the On/Off button twice.
What to do if Rinnai REU-AM2024WD water doesn't flow after a power interruption during bath fill?
If your Rinnai Water Heater experiences a power interruption while filling a bath and water doesn't flow when power is restored, turn off all hot water taps, then press the On/Off button twice.
What to do if there is a flame failure / low gas flow in my Rinnai Water Heater?
If you experience a flame failure or low gas flow with your Rinnai Water Heater, first, ensure that the gas supply is turned on at both the water heater and the gas meter or cylinder. Then, check for any obstructions that might be blocking the flue outlet.
What to do if the wireless water controller is 'Out of Range' in Rinnai REU-AM2024WD?
If the wireless water controller (when fitted) is 'Out of Range' due to the distance from transceiver or an obstruction with your Rinnai Water Heater, try moving the wireless water controller or transceiver, or remove the obstruction.
What to do if incorrect dipswitch setting detected in Rinnai REU-AM2024WD Water Heater?
If an Incorrect Dipswitch Setting is Detected on your Rinnai Water Heater, the installer needs to check the Dipswitch Settings. It is recommended to schedule a service call.
Why does my Rinnai REU-AM2024WD have flame failure or low gas flow?
If you are experiencing flame failure or low gas flow with your Rinnai Water Heater, verify that the gas is turned on at both the water heater and the gas meter or cylinder. Also, check for any obstructions to the flue outlet.
What causes a Rinnai Water Heater wireless controller to be out of range?
If fitted, a Rinnai Water Heater's wireless water controller might be ‘Out of Range’ because of the distance from the transceiver or an obstruction. To resolve this, try moving the wireless water controller or transceiver, or remove any obstructions.
General| Brand | Rinnai |
|---|---|
| Model | REU-AM2024WD |
| Category | Water Heater |
| Language | English |
Crucial pre-operation safety instructions and warnings for safe use.
Compliance requirements and certifications for the appliance installation.
Risks associated with high-temperature water and necessary precautions.
Guidelines for safe daily operation and user supervision.
Factory pre-set and adjustable maximum water temperatures.
Step-by-step guide for operating the MC-601Q controller.
List of error codes and their descriptions for fault diagnosis.
Solutions for common issues when no controllers are fitted.
Installation must comply with relevant standards and codes.
Guidelines for selecting an appropriate installation location.
Instructions on securely mounting the water heater unit.
Regulations and configurations for hot water temperature limits.
Procedures to verify proper installation and operation.
Checking and confirming the final hot water temperature.
