Need help?Do you have a question about the Rinnai REU-VR2632 and is the answer not in the manual?
General| Brand | Rinnai |
|---|---|
| Model | REU-VR2632 |
| Category | Water Heater |
| Language | English |
Procedure for inspecting and cleaning manifold injectors.
Steps to inspect electrodes and the combustion chamber plate.
Cleaning combustion chamber air holes and heat exchanger fins.
Checking and replacing seals and gaskets, especially manifold seals.
Refitting parts, leak checks, dipswitch, and pressure checks.
Turning on power/gas and opening taps to check pressure.
Adjusting regulator screw and high pressure potentiometer.
Calibrating 'Forced Low' combustion and checking pressures.
Calibrating 'Forced High' combustion and checking pressures.
Setting for 'Forced Low' combustion and its operating pressures.
Adjusting the high pressure potentiometer on the PCB.
To Next Page