Rinnai REU-VR2426WS Solar 26 User Manual

Operation / Installation
Information
Continuous Flow Water Heaters used in Rinnai
Solar Hot Water Systems
This appliance shall be installed in accordance with:
• Manufacturer’s Installation Instructions
• Current AS/NZS 3000, AS/NZS 3500 & AS 5601
• Local Regulations and Municipal Building Codes including local OH&S requirements
This appliance must be installed, serviced and removed by an Authorised Person.
All Rinnai gas products
are A.G.A.certified.
Distributed and serviced in Australia under a Quality
System certified as complying with ISO 9001 by
SAI Global
Model No.
REU-VR1620WS
REU-VR2426WS
Model Name
Solar 20
Solar 26

Rinnai REU-VR2426WS Solar 26 Specifications

General

Brand	Rinnai
Model	REU-VR2426WS Solar 26
Category	Water Heater
Language	English

Summary

Regulatory Information and Warnings

Notice to Victorian Consumers

Appliance must be installed by a licensed plumber for insurance and compliance.

Australian Gas Association Certification

Water heater certified by AGA; certification number on data plate.

Warning About Hot Water

Precautions against scalding hazards, including temperature checks and supervision.

Applications of Rinnai Solar Boosters

Models REU-VR1620WS & REU-VR2426WS are for solar hot water gas boosters only.

Features, Benefits, and Important Information

Key Features and Benefits

Highlights continuous hot water, compact design, electronic ignition, and low noise.

Important Safety and Operational Information

Covers water temperature checks, flue outlet safety, material clearance, and freezing protection.

Troubleshooting and Warranty

Refers to related Rinnai publications for detailed troubleshooting and warranty conditions.

Installation, Commissioning, Maintenance, and Service

Specific Application: Solar Hot Water Boosters

Models are specifically designed for Rinnai solar hot water gas booster applications.

Installation and Service Requirements

Information requires reference to specific Rinnai manuals and authorised personnel.

Factory Temperature Settings and Compliance

Units are factory pre-set; local regulations may require temperature limiting devices.

Available Accessories

Space Saving and Protective Accessories

Recess boxes, pipe covers, security cages, and brackets for installation and protection.

Smartstart and Flue Diverter

Accessories for water saving (Smartstart) and flue management (Sideways Flue Diverter).