Rinnai SPLIT SOLAR User Manual

Operation / Installation
Manual
RINNAI SPLIT SOLAR HOT WATER
SYSTEMS
NOTE
NOTE
WARNING
All Rinnai gas products
are A.G.A. certified.
W169
SAI Global
The appliance must be installed, commissioned and serviced by an
authorised person in accordance with all applicable local rules and
regulations.
The collector flow and return pipes should be 15mm copper tube or
alternative tube supplied by Rinnai.
Plastic pipe must not be used. Plastic pipe is not suited to the high
water temperatures and pressures that may occur in the collector
flow and return system.
15401021
AS 2712
Lic No.1849
SAI Global
NOT SUITABLE AS A POOL OR SPA HEATER
Certain systems may require some components to be supplied by
the Installer.

Rinnai SPLIT SOLAR Specifications

General

Type	Split Solar Water Heater
Working Pressure	800 kPa
Solar Contribution	Up to 80%
Backup Heater	Electric
Tank Capacity	300L

Summary

IMPORTANT INFORMATION & WARNINGS

GENERAL SAFETY AND REGULATORY GUIDELINES

Essential safety, regulatory, and operational guidelines for the appliance, including scald hazards.

SCALDS HAZARDS

Detailed information and precautions regarding the dangers of scalding from hot water.

SAVE A SERVICE CALL

TROUBLESHOOTING NO OR INSUFFICIENT HOT WATER

Addresses issues related to no water, insufficient hot water, and water hammer.

SPECIFICATIONS

SYSTEM AND COLLECTOR SPECIFICATIONS

Provides technical specifications and dimensions for the overall system and solar collectors.

CYLINDER AND GAS BOOSTER SPECIFICATIONS

INSTALLATION & MAINTENANCE - ALL SYSTEMS

REGULATIONS, SAFETY, AND LOCATION

Outlines regulatory, OH&S, and location requirements for system installation.

GAS BOOSTER, PIPING, AND TEMPERATURE

FROST PROTECTION AND SYSTEM FITTINGS

INSTALLATION OF SOLAR COLLECTORS

ORIENTATION, INCLINATION, AND MOUNTING

INSTALLATION OF SOLAR GAS BOOSTED SYSTEMS

SYSTEM OVERVIEW AND GAS BOOSTER REQUIREMENTS

INSTALLATION & MAINTENANCE - GAS BOOSTED SYSTEMS

CLEARANCES AND GAS BOOSTER MOUNTING

INSTALLATION PROCEDURE AND CHECKS

Outlines the installation procedure, pump checks, flow control adjustment, and pre-heating checks.

INSTALLATION & MAINTENANCE - ELECTRIC BOOSTED SYSTEMS

SYSTEM OVERVIEW AND ELECTRICAL REQUIREMENTS

INSTALLATION & MAINTENANCE - ELECTRIC BOOSTED

INSTALLATION PROCEDURE AND SYSTEM FILLING

Outlines the installation procedure, filling the system, and pump/flow control checks.

ELECTRICAL CONNECTIONS AND THERMOSTATS