Rinnai Australia - 11 - Solar Split Systems Operating / Installation Manual - Version 9 - 21/11/12
Table 3 - Model Numbers and Specifications
CHARACTERISTICS
ENDURO
(SP200A) or
(SP200A FTC)
EXCELSIOR
(EXT OR EXT FTC)
E-FROST
(HPFTC- 8-10)
TYPE
Flat plate Flat plate
Flat Plate /
Heat Pipe
- Waterways Copper Copper Copper
- Absorber Aluminium Copper Aluminium
- Selective Surface High Performance Sputtered Titanium Oxide High Performance
Maximum Operating
Pressure
Casing Material
Overall Dimensions
(L x W x H) (mm)
1940 x
1025 x
80
1964 x
1047 x
81
1940 x
1025 x
80
Weight empty
(STD/FTC) (kg).
33 / 35 35 / 38 34
Water volume (Litres) 1.3 1.5 0.6
Number risers
810
10
Potential Solar Output at
PTR relief conditions (kW)
- 1 Collector (mm) 1940 x 1025 1940 x 1047 1940 x 1025
- 2 Collectors (mm) 1940 x 2130 1940 x 2174 1940 x 2130
- 3 Collectors (mm) 1940 x 3235 1940 x 3301 1940 x 3235
Frost Protection to -12°C.
Power must be on at the
pump and the controller
must be in low temperature
mode
(refer page 19).
1.25
Approximate Roof space Required: Length x Width
Frost Protection
* Standard version - no frost protection
FTC Version Frost Protection to -5°C
* FOR MORE INFORMATION ON FROST PROTECTION
REFER TO WARRANTY BOOKLET
MODEL NUMBERS AND SPECIFICATIONS
CONSTRUCTION
850 kPa
Aluminium
To Next Page
Loading...
Need help?
General
