To Next PageTo Next Page
Need help?Do you have a question about the Rinnai V75e and is the answer not in the manual?
General| Brand | Rinnai |
|---|---|
| Model | V75e |
| Category | Water Heater |
| Language | English |
Defines safety symbols like DANGER, WARNING, and CAUTION.
Outlines safety rules for gas handling, clearances, and general appliance safety.
Details the skills and qualifications required for a licensed installer.
Covers essential do's, don'ts, codes, and grounding for installation.
Lists included parts, tools, and materials needed for the installation process.
Guides on site selection, considering clearances, water quality, and environment.
Specifies required clearances for vent termination based on installation type.
Details specific clearance requirements for different models and locations.
Explains vent length limits and DIP switch settings for indoor models.
Illustrates flue termination, condensate collector use, and management for indoor units.
Covers requirements and installation of the pressure relief valve.
Covers isolation valves, piping requirements, and connecting the water supply.
Critical safety warnings and instructions for connecting the gas supply to the appliance.
Provides guidance and tables for sizing gas pipes based on type, pressure, and length.
Instructions for safely connecting the water heater to the electrical power supply.
How to set DIP switches for high altitude and vent length.
A checklist to confirm correct gas and electrical connections and settings.
Discusses controller setup options, maximum units, and ideal placement.
Step-by-step instructions for physically mounting the temperature controller on a wall.
A comprehensive checklist to ensure all installation steps and requirements are met.
Detailed technical specifications for various Rinnai models.
Provides dimensional drawings and measurements for different water heater models.
Illustrates pressure drop and water flow rates versus operating conditions.
A schematic electrical diagram showing the internal wiring and logic of the water heater.
Provides essential safety information and an overview for operating the water heater.
Step-by-step instructions for safely starting, operating, and shutting down the water heater.
Explains the functions and settings for the temperature controller.
Guides users on adjusting water temperature and understanding related safety warnings.
Instructions on how to access and view diagnostic information and error codes.
A list of error codes, their definitions, and recommended solutions for troubleshooting.
Instructions for cleaning internal components, filters, and the unit exterior.
Emphasizes vent inspection, motor cleaning, and checking for obstructions.
Guidance on scale issues, diagnostic codes, and directs to flushing procedures.
Recommendations for protecting the unit from freezing and procedures for winterization.
A detailed procedure for flushing the heat exchanger using vinegar to remove scale.
Instructions for draining the water heater for storage or to prevent freezing damage.
Steps to take if the water heater or its piping has frozen.
Specific regulatory requirements, including CO detectors and signage.
Lists common replacement parts with their corresponding item numbers from the tech sheet.
Details the terms, coverage periods, and conditions of the Rinnai limited warranty.
Outlines what is not covered by the warranty, such as installation issues and misuse.
Discusses implied warranties and limitations on Rinnai's liability.
