Do you have a question about the Rinnai V75i series and is the answer not in the manual?
Type | Tankless Water Heater |
---|---|
Fuel Type | Natural Gas or Propane |
Maximum BTU | 180, 000 BTU |
Flow Rate | 7.5 GPM |
Energy Factor | 0.82 |
Installation | Indoor |
Gas Connection | 3/4" NPT |
Water Connection | 3/4" NPT |
BTU Input Range | 15, 000 - 180, 000 BTU |
Temperature Range | 98°F to 140°F |
Electrical Requirements | 120V AC, 60Hz |
Ignition Type | Electronic |
Warranty | 5-year on parts, 1-year on labor |
Explains the meaning of DANGER, WARNING, and CAUTION safety alert symbols.
Installer qualifications, general instructions, location, and clearance requirements.
Proper installation of venting and management of condensate for indoor models.
Requirements for pressure relief valves, piping, and gas supply connections.
Electrical connections, altitude/vent settings, temperature controls, and final checklist.
Key technical details, performance metrics, and energy factors of the water heater models.
Physical dimensions, clearances, and graphs detailing performance characteristics.
Ladder diagram illustrating electrical components and their connections.
Crucial safety information and steps to take if a gas leak is detected.
Step-by-step guide for operating the unit and using the temperature controller.
Explanation of diagnostic codes and basic maintenance procedures for optimal performance.
Details on what is covered, for how long, and conditions for service.
Specific conditions that void the warranty and limitations on claims.