5.4 CAL: Scale Calibration Menu
Items in this group are used for scale calibration. See Section 7.
Items Name Description
Zero calibration ⊕ ZERO Perform a zero calibration
Span calibration ⊕ SPAN Perform a span calibration
Linearity calibration ⊕ ED.LIN Perform a linearity calibration
Clear linearity points ⊕ CLR.LIN View/clear linearity points
Direct zero calibration ⊕ DIR.ZER Perform a direct zero calibration
Direct span calibration ⊕ DIR.SPN Perform a direct span calibration
Restore factory calibra-
tion
⊕ FAC.CAL Set the calibration and BUILD menu settings to factory default
values
⊕ = Change only possible in FULL Setup
22 C500-600-2.0.3
To Next Page
