Rinstrum R320

Reference Manual V1.19 Software Versions 4.xx
Page 46 003R-682-119
(Reset Printed
Consecutive
Number) 
I.LOCK
(Print Interlock)
Sets the type of printing interlock to be used. Options:
• NONE
• MOTION: Printing is enabled every time the scale becomes stable.
• RET.Z: Printing is enabled after the scale has returned to zero and
is stable.
Default: NONE
S.RESP
(Simple Response)
Use this option to set if the indicator responds or not when serial type is
set to simple network. Options:
• OFF
• ON
• Default: OFF