3.
Instruction
3.1 HOW TO USE THE BOAT ONLY WITH REMOTE
3.1.1 TURN ON THE REMOTE
Unfold the rack and long press the power button for 2 seconds.
Note: The remote control is not waterproof, please keep it out of contact with water. The remote control will vibrate when
reaching a low level of power.
3.1.2 TURN ON THE BOAT AND LIGHT
Place the boat battery in the compartment, power on and close the compartment properly;
Place the boat on the level ground, short press the power button of the boat and wait for 10 seconds till
the boat is on (a long “beep” will be heard when activated).
Note: To optimize the performance of the boat, please ensure it is placed on the level ground when to be activated.
Short press the power button
of the remote to switch the
lights on/off.
To Next Page
Loading...