Radio Setting
LOC_DX: LOC/DX
Choose radio distant or local.
DX: Stations with strong and weak
signals can be broadcast.
LOCAL: Only station with strong signal can be
broadcast.
STEREO_MONO: STEREO/MONO
Choose FM mono/stereo.
AF: ON/OFF
Choose AF (Alternative Frequency) on or off.
AF ON: AF function is activated.
AF OFF: AF function is disabled.
Remark: AF indicator on LCD will flash until
RDS information is received. If RDS service
is not available in your area, turn off the AF
mode.
TA: ON/OFF
C h o o s e TA ( T r a f f i c A n n o u n c e m e n t s
Identification) on or off.
When TA mode is turned on, the TA indicator
will blink.
When trafc announcement is received, the TA
indicator will display. The unit will temporarily
switch to the tuner mode (regardless of the
current mode) and begin broadcasting the
announcement at TA volume level. After the
traffic announcement is over, it will return to
the previous mode and volume level. When
TA is turned on, SEEK, SCAN, AMS function
can only be received or saved when traffic
program identication (TP) code is received.
TA VOLUME: 08-33
Choose TA-VOL level.
REGIONAL: ON/OFF
Choose AF function to implement or ignore the
regional code (of the PI) and only stations in
the current region can be tuned automatically.
REG ON: AF function will implement the
regional code (of the PI) and only stations in
the current region can be tuned automatically.
REG OFF: AF function will ignore the regional
code (of the PI) and stations in the other
regions can also be tuned automatically.
CT: ON/OFF
Some stations broadcast the time and date
within the encoded RDS signal. The clock
time is automatically adjusted when “CT” is
set to “ON”.
Rotary Knob Menu
To Next Page
Loading...
